- #Download Carescape Gateway Technical Manual software download#
- #Download Carescape Gateway Technical Manual manual#
English Order code: M (CD), M (paper) 4 th edition Document number M A 28 June,, 2011, 2012 General Electric Company. All specifications subject to change without notice.
#Download Carescape Gateway Technical Manual manual#
Group 1 contains all ISM (Industrial, scientific and medical) equipment in which there is intentionally generated and/or used conductively coupled radio-frequency energy which is necessary for the internal functioning of the equipment itself.1 GE Healthcare CARESCAPE Monitor B650 Technical Manual Software Version 1 Conformity according to the Council Directive 93/42/EEC concerning Medical Devices amended by 2007/47/EC. In accordance with CISPR 11: Group 1, Class B In accordance with EU Medical Device Directive IPX1 - degree of protection against harmful ingress of water. The degree of protection against electric shock is indicated by a symbol on each parameter module.ĮQUIPMENT not suitable for use in the presence of a FLAMMABLE ANESTHETIC MIXTURE WITH AIR OR WITH OXYGEN OR NITROUS OXIDE.ĬONTINUOUS OPERATION according to the mode of operation. The B30 monitor and N-F(C)(REC) Extension Module and E-PSM(P)W Patient Side Module are indicated for use by qualified medical personnel only.ĬLASS I AND INTERNALLY POWERED EQUIPMENT – the type of protection against electric shock. CO 2 measurements are indicated for patients who weight over 5 kg (11 lb). The extension module N-FCREC (option N-FCREC or N-FC) is indicated for monitoring of CO 2 and respiration rate of all hospital patients. The NIBP measurement is indicated for patients who weight 5kg (11 lb) or up.The E-PSM(P)W is intended for all hospital departments including intra-hospital transport but excluding harsh physical environment like MRI. Impedance respiration measurement is indicated for patients ages three years and up. The hemodynamic parameters of the module comprise ECG (including ST-Segment and arrhythmia), impedance respiration, oscillometric NIBP (sys/dia/mean), temperature, SpO 2 (including monitoring during conditions of clinical patient motion), and invasive blood pressure. The Patient side module E-PSM(P)W and accessories are indicated for monitoring of hemodynamic parameters of all hospital patients. The B30 monitor is intended for all hospital patients and all hospital departments including intra-hospital transport but excluding harsh physical environment like MRI. The B30 monitor is indicated for continuous monitoring of hemodynamic parameters (including arrhythmia and ST segment analysis) and respiratory status and creation of limit alarms. The B30 patient monitor is intended for multiparameter patient monitoring. APPENDIX D: Planned maintenance check form, B30. APPENDIX B: ElectroMagnetic Compatibility. B30 monitor language files installation. #Download Carescape Gateway Technical Manual software download#
APPENDIX A: Software download instruction.7.3 Gas sampling system troubleshooting.7.2 Troubleshooting chart for CO2 measurement.7.1 Troubleshooting chart for recorder unit.6.2 Front panel labeling, N-FC, N-FCREC:.5.0.1 Instructions after replacing MiniC unit.1.5 Analog Outputs, direct ECG and synchronization.3.5 To download the software on CPU board.
3.2 Handling and storage of LCD display component.3.1.2 Troubleshooting for ECG and STP parameters.3.1.1 Troubleshooting for NIBP parameter.3.2.6 Multiparameter Hemodynamic Modules.3.2.5 Extension Module with CO2 measurement.2.10 Patient (sink) leakage current test (mains voltage on the applied part).2.9.2 Acceptance criteria SFC - ground (earth), line or neutral open.2.9 Patient (source) leakage current test.2.8.2 Acceptance criteria SFC ñ ground (earth), line or neutral open.2.8 Enclosure (Touch) leakage current test.2.7.2 Acceptance criteria SFC (Single fault condition) - ground (earth), line or neutral open.2.7.1 Acceptance criteria NC (Normal condition).2.7 Ground (earth) wire leakage current tests.2.6.2 Impedance of Protective Earth Connection.1.5.2 Inserting and removing the parameter modules.4.1 Intended purpose (Indications for use).
0 kommentar(er)
